Bee’nooba (2 oz) | Case of 12
$89.88
MAKER COLLECTION
Bee’nooba
CASE OF 12 – WHOLESALE PRICING AVAILABLE TO EVERYONE
Stock up on Bumblechutes Bee’nooba with this case of twelve (12) individual 2 oz jars, offered at our wholesale pricing with no wholesale account required.
The hand-applied hard-wax oil that gives wood greater depth, a smooth natural feel, and practical protection without hiding what makes the material beautiful.
Good wood should still look and feel like wood. Bee’nooba brings together polymerized tung oil, carnauba wax, natural vitamin E oil, citrus thinner, and beeswax in a rich, easy-to-control finish for makers who want natural character without a heavy, plastic-looking coating.
The polymerized tung oil penetrates the wood and cures within its fibers, enriching the grain and building protection from within. The citrus thinner helps the finish spread easily and work into the surface, while beeswax and carnauba wax add body, smoothness, and practical moisture resistance. Once buffed, Bee’nooba leaves behind a warm, low-luster finish that feels intentional rather than heavily coated.
Bee’nooba can be applied directly to properly prepared bare wood as a complete hard-wax oil finish. It can also be used after Bumblechutes Wood Finish has fully cured, adding a final layer of smoothness, richness, and surface protection.
Why it earns a place in the shop
1. Combines penetrating polymerized tung oil and natural waxes in one hand-applied finish.
2. Enriches the color and grain while preserving the natural look and feel of the wood.
3. Creates a smooth, moisture-resistant surface suited to ordinary spills, handling, and everyday use.
4. Works as a standalone finish or as the final step over Bumblechutes Wood Finish.
Best for: Furniture, tables, countertops, shelving, bowls, turned pieces, cutting boards, wooden utensils, and other unfinished or oil-finished wood projects.
How to use
1. Begin with wood that is clean, completely dry, and sanded to the desired smoothness. Remove all dust before applying. If using Bee’nooba over Bumblechutes Wood Finish, allow the underlying finish to cure fully first.
2. Apply a small amount in a very thin, even layer using a clean, lint-free cloth or finishing pad. Work with the grain and avoid leaving heavy areas of product on the surface.
3. Allow Bee’nooba to settle into the wood for approximately 20 to 30 minutes, then buff thoroughly with a clean cloth until the surface feels smooth and dry rather than wet or tacky.
4. Allow the finish to cure completely before placing the project into service. Apply additional thin coats when greater build or protection is desired, allowing each coat to cure before applying the next.
Choose your size
2 oz: The ideal trial or gift size for a cutting board, a small turned piece, or several wooden utensils.
4 oz: The everyday maker size for multiple smaller projects, bowls, boards, or occasional furniture finishing.
9 oz: The versatile shop size for tables, countertops, multiple projects, or makers who use hard-wax oil regularly.
16 oz: The professional choice for large surfaces, production work, frequent finishing, or maintaining an extensive collection of wood projects.
Complete the system: Apply Bumblechutes Wood Finish first to penetrate deeply and build protection within the wood. Once it has fully cured, apply Bee’nooba as the final hand-buffed layer to refine the surface and add greater moisture resistance. For a simpler single-product finish, Bee’nooba may also be applied directly to properly prepared bare wood.
